TEC1-12705 Thermoelectric Peltier Cooler 40 mm x 40mm 12V 77 Watt
Customer Rating :
List Price : Price : $5.39
Product Description
This is CRAZYCONN manufactured TEC1-12705 Thermoelectric Cooler Peltier 12V 50W (77W Maximum) Power Cord Length: ~100mm *** Note: hot side needs heat sink all the time. ***
Model number: TEC1-12705 with Perimeter Sealant for Moisture Protection and Strain Relief Sleeves on Lead Wires.
Voltage(V): 12V Umax(V): 15.4V Imax(A): 5A
QMax (W): 77W
Dimensions: 40mm x 40mm x 3.6mm
Power Cord Length: 350mm with strain relief sleeves.
TEC1-12705 Thermoelectric Peltier Cooler 40 mm x 40mm 12V 77 Watt
TEC1-12705 Thermoelectric Peltier Cooler 40 mm x 40mm 12V 77 Watt Reviews
This review is from: TEC1-12705 Thermoelectric Peltier Cooler 40 mm x 40mm 12V 77 Watt (Electronics)
This model was exactly the same as my TEC1-1204 except this one ends in 5 as in TEC1-1205. I'm going to assume it's the next model up. The only difference is this one is about .8mm thinner than the one I have but my cooler works just fine with it. Just be sure to apply thermo paste to both sides which this doesn't come with by the way and you're good to go. You can get thermo paste at Fry's, Micro Center or any electronic store. It's a cheap fix for your portable 12 volt or 120v cooler.
Help other customers find the most helpful reviews
This review is from: TEC1-12705 Thermoelectric Peltier Cooler 40 mm x 40mm 12V 77 Watt (Electronics)
Bought this for my Coca-Cola 6-can mini fridge. The old peltier broke when replacing the heatsink. I had to make sure I found a peltier within the 70 watt range and this happend to be it. So, I got this to fix it. Well, judging the old ones imprint in the cooling block, this was an upgrade. The last one did ok, but wasn't big enough for the job. So I installed this, It actually gets COLDER inside. It does what it says, no problems.
Help other customers find the most helpful reviews
No comments:
Post a Comment